DJI S900 Spreading Wings w/Zenmuse Z15-GH4 Gimbal and A2 Flight Control System Combo

Description

If you are looking for the ultimate large scale multirotor camera platform than the DJI Spreading wings S900 maybe just what the doctor ordered! The spreading wings S900 is packed full of new unique features and innovative new ideas.  

The S900’s arms and landing gear are made of sturdy carbon fiber, greatly reducing weight while increasing stability and strength. This enables a long flight time without sacrificing performance.

With arms that fold in to save space, the S900 is built to be taken wherever you need to go. When your ready to fly, the S900 can be ready to go in just a few minutes. Never before has a professional hexcoptor been so portable and
easy to transport.

The upper center board can be removed, allowing easy access to install your flight controller and IMU, and giving you a convenient way to setup the power distribution system. Even installation of your main controller, iOSD, Lightbridge, or any other accessories is faster and easier than ever before. This new center board structure is perfectly compatible with the DJI WKM and A2 flight controllers.

A redesigned power distribution system improves safety and reliability. Gold-plated metal bearings with a unique screw design secure the power cords, ensuring the cables will not come loose during flight.

The Zenmuse Z15-GH4 Gimbal is guaranteed to deliver nothing short of the best in camera control and stabilization and was specifically designed for the Panasonic GH4 and GH3, so either camera fits perfectly in the gimbal. The Z15-GH4 gimbal connects with your GH4 through a standard HDMI cable.

The A2 Flight Control system is quite possibly the most advanced multirotor flight stabilization controller in the world that completely ensures total ease of flight, reliability and stability in any situation. The A2 flight controller supports all multirotor platforms and is Ideal for DJI video downlink, iOSD, ground station, Zenmuse gimbals, and more importantly its future proof! All modules can be upgraded online through DJI Assistant to offer greater functionality.

Features:
• Lightweight, Strong and Stable
• Highly Portable, Easy to Carry
• New Power Distribution System
• Removable Upper Center Board
• Sparkproof Plug
• Professional Quality
• Wide Range of Shooting Angles
• Retractable Landing Gear
• Compatible with Zenmuse Gimbals
• Greater Power
• Innovative Arm Design

Frame Specs:
Frame Diameter: 900mm
Arm Length: 358mm
Frame Arm Weight: 316g (including Motor, ESC, Propeller)
Center Frame Diameter: 272mm
Center Frame Weight: 1185g (with Landing Gear Mounting Base, Servos)
Landing Gear Size: 460 × 450 × 360mm
Motor Stator Size: 41×14mm
KV: 400rpm/V
Max Power: 500W
Weight: 158g
ESC Working Current: 40A
Working Voltage: 6S LiPoly
Signal Frequency: 30Hz ~ 450Hz
Drive PWM Frequency: 8KHz
Weight: 35g
Material High strength performance engineered plastic
Size: 15 × 5.2inch
Weight: 13g   
Takeoff Weight: 4.7Kg ~ 8.2Kg
Total Weight: 3.3Kg
Power Battery: LiPo 6S 10000~15000mAh
Max Power Consumption: 3000W

Gimbal Specs:
Supported Camera: Panasonic GH4/GH3
Supported Lens: Olympus M.Zuiko Digital ED 12mm f2.0
GCU Input Voltage: 4S~12S LiPoly
Static current: 200mA (@25V)
Dynamic current: 400mA (@25V)
Locked-rotor current: 4A (@25V)
Operating Temperature: -10°C ~ 50°C
Weight: 1.26Kg
Dimensions: 233 x 210 x 192mm
GCU Weight: 63g
GCU Dimensions: 64.2 × 34.1 ×19.5mm   
Load Weight: 690g

Flight Controller Specs:
Supported Multi-rotor: Quad-Rotor, Hex-Rotor, Octo-Rotor
Supported ESC output: 400Hz refresh frequency
Supported Transmitter for Built-in Receiver: Futaba FASST Series and DJI DESST Series
External Receiver Supported: Futaba S-Bus, S-Bus2, DSM2
Recommended Battery: 2S ~ 6S LiPoly
Operating Temperature: -5°C to +60°C
Hovering Accuracy(In GPS Mode): Vertical ± 0.5m, Horizontal ± 1.5m
Maximum Wind Resistance: < 8m/s (17.9mph/28.8km/h)
Max Yaw Angular Velocity: 150 deg/s
Max Tilt Angle: 35°
Ascent/Descent: ±6m/s
Power Consumption: 5w Max
Weight: 224g
Dimensions: 54 x 39 x 14.9mm