TrackStar TS3t 2.4Ghz FHSS 3-Channel Digital Proportional Radio Control System (AR Warehouse)

Description

Introducing the TS3t 3ch Surface Radio System, the first radio set made by TrackStar!

What does TS3t stand for?
TS means TrackStar;
3 means 3 Channels and;
t means telemetry!

The TrackStar TS3t radio system comes with 3 different sensors. The first one is a 2S voltage sensor, it's used to detect the usage of the Lipoly battery on the car. The second one is a temperature sensor, it can detect the temperature of the motor/ESC. The last one is a speed sensor, it can show the RPM of the wheels. All 3 signals will be managed by a telemetry module connected to the receiver and all the data will show in real-time on the LCD montior of the transmitter. The system will also record the maximum temperature that the motor/ESC has reached, so the user can use the data for later analysis.

Features:
• 3-Channel 2.4GHz FHSS Digital Radio with telemetry
• Includes 3-channel receiver
• Includes 3 different telemetry sensors and telemetry module
• Data Logging for Temperature
• 4 cell Battery Holder for lighter Weight
• Accepts Optional 5 cell Ni-MH Batteries or 2S Li-Po or 2S Li-Fe Battery Packs
• 6 Model Memory
• Exponential, ST and TH curve Adjustments
• Anti-Lock Braking
• Throttle Hold
• Channel 2 and 3 mixing
• Programmable Fail Safe
• Digital Trims
• Digital Battery Voltage Monitor

Transmitter Specs:
Nominal Input Voltage: 4.4~8.6V
Low Voltage Warning: YES (less than 4.4V)
Dry Weight: 280g
Dimensions: 100x140x200mm
Frequency: 2.4GHz FHSS
Charger port: YES

Receiver Specs:
Nominal Input Voltage: 4.4~8.6V
Weight: 8g
Dimensions: 13x20x30mm
Frequency: 2.4GHz FHSS

Telemetry Concentrator Specs:
Dimension: 13x20x30mm
Voltage measuring range: 1~30V
Temperature measuring range: 0~150°C‏
Speed measuring range: 480~50000rpm

Included:
TS3t 2.4Ghz FHSS 3-Channel Digital Transmitter
TS3t 2.4Ghz 3-Channel Receiver
TS3t telemetry module
Connecting wire
Speed Sensor x 1
Voltage Sensor x 1
Temperature Sensor x 1
User's Guide

Required:
4 x AA NiMH cells or 2S LiFe Battery Pack for transmitter

Note: Always check the polarity of the battery connector before using a LiPoly/LiFe battery in this transmitter. In some instances it may be nessesary to reverse the polarity of the battery plug.