KingKong 210GT X Frame Racing Drone (RTF) (Mode1) (Green)

Description

KingKong 210GT X Frame Racing Drone (RTF) (Mode1) (Green)

KingKong have put out a superb drone package that comes with everything you need to fly. All you need is a battery (3S 1300mAh LiPoly) and if you are FPV racing then add your FPV goggles or an FPV base station. 

The 210GT Racing Drone comes pre-built with all electronics installed. Just add the supplied propellers and VTx Antenna. In the box you’ll find the excellent, easy to use Turnigy TGY-i6S radio controller that is pre-bound to the 210GT. 

KingKong have thought of everything starting with a 3mm carbon fiber “X” frame lower deck with a 1.5mm carbon fiber upper deck giving you all the strength you need. The F3 flight controller is setup for racing performance and has the processing speed to keep up with the 20A BLHeli ESC’s driving 2205-2300KV motors swinging 5040 propellers. This is one quick beast. There are motor guards to protect your motors from that inadvertent crash.

Up front is a 700TVL CCD FPV Camera in an adjustable mount. Easy to position for the correct viewing angle. All your video is blasted to your goggles by a 5.8GHz 600MW 32ch VTx with a push button channel selector for easy channel selection. At the rear is a LED light bar so the crowd can see where you are.

This is a great drone and flight controller package that will get you flying straight away. Let’s get racing!

Features:
• 210 wheelbase, 3mm Carbon Fiber lower deck
• Already built
• F3 Flight controller (pre-tuned)
• Powerful KINGKONG 2205-2300kv motors, 20A 2S-4S Opto BLHeli ESCs
• 5040 Propellers
• 700TVL, CCD FPV Camera
• 5.8GHz 600MW 32ch video transmitter
• Bright rear LED
• Turnigy TGY-i6s radio controller
• Input Voltage: 3~4S LiPoly Battery

Specs:
Wheelbase: 210mm
Thickness of Upper Plate: 1.5±0.2mm 
Thickness of Bottom Plate: 3±0.2mm
Flight Controller: F3
Motor: 2205-2300KV Brushless (2~4S) (CW, CCW)
ESC: 20A BLHeli (2~4S) Opto
Propeller: 5040 (CW, CCW)
FPV Camera: 700TVL, CCD, F2.8, 115deg FOV, PAL
Video Tx: 5.8GHz 600MW 32ch
Antenna: Mushroom SMA
Radio TX: TGY-i6S
Radio Receiver: FS-iA6
Frame Size: 198x165x40mm (no props)
Flying Weight: 331g (no battery)

Includes:
1 x KingKong 210GT “X” frame Racing Drone 
1 x Turnigy i6S Radio Transmitter
20 x 5040 Propellers (CW,CCW)
1 x SMA RHCP 5.8G Antenna with cover
1 x Battery strap
1 x USB Cable
1 x Carbon fiber spanner set
1 x BLHeli Loader USB Adapter
1 x Cable
1 x Velcro
4 x Cable ties
1 x Manual

Required:
1 x 3S~4S 1300mAh LiPoly Battery
1 x Battery Charger
1 x FPV Goggles or Base station