Join to our channels: new products, coupons, best deals:
Brushless Whoop FC
Happymodel Crazybee F4 PRO V3.0 10A 4S Frsky
Multirotors → Tinywhoops → Whoop Flight Controllers → Brushless Whoop FC → Happymodel Crazybee F4 PRO V3.0 10A 4S PNP → Happymodel Crazybee F4 PRO V3.0 10A 4S FrskyMCU: | F411 |
Gyro: | MPU6000 |
OSD: | + |
Power : | 2-4S |
5V BEC: | 1A |
Current Sensor: | 70A |
ESC type: | built in |
ESC: | 4x10A |
BLHeli: | BLHeli_S |
Receiver: | Frsky SPI |
VTX: | - |
UART Rx: | 2 |
UART Tx: | 2 |
Buzzer pad: | + |
LED pad: | + |
IR/INR pad: | IRX |
USB: | Micro USB |
DJI compatible: | - |
Size: | 28.5х28.5mm |
Mount Holes: | whoop 29x29mm |
Weight: | 5.1g |
Specification:
Brand name: Eachine
Package Included:
1 x CRAZYBEE F4FR PRO V3.0 Board
Brand name: Eachine
(Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR (Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS (No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 2-4S battery input (DC 7-17V) Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable) Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable) No RX version need to add external Receiver Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 70A Current meter scale set to 470 Built-in 5V 1A BEC Built-in voltage detection |
MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HV (7v/17v) Current: 10A continuous peak 12A (5 seconds) Support BLHeliSuite programmable Factory firmware: F_H_40_REV16_5.HEX Default protocol: DSHOT600 |
SPI BUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D8 and D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe support |
No RX version support external serial-bus receiver like XM+, crossfire, S-FHSS etc. |
Package Included:
1 x CRAZYBEE F4FR PRO V3.0 Board
Share
Prices for Happymodel Crazybee F4 PRO V3.0 10A 4S Frsky in stores
Deals found: 33 (AliExpress4)
Store | Stock level | Lot price | Shipping cost | Coupon / promocode | Pcs./lot | 1pc price |
AliExpress | High stock level | $45 | 1 | $45 | ||
AliExpress | High stock level | $51 | 1 | $51 | ||
AliExpress | High stock level | $51 | 1 | $51 | ||
AliExpress | High stock level | $51 | 1 | $51 |
See also
Happymodel XT30 Plug + Wire + 100uF Capacitor for whoops
$0.96
Happymodel Crazybee F4 PRO V3.0 10A 4S PNP
$52