The Dingo frame was designed with you brutal freestyle pilots in mind. Why go buy some POS frame from B**gg**d when you can get this tank for so cheap? There’s plenty of room inside this frame for your electronics. It comes stock with the micro cam mounts featured on the mongoose, but I know some of you will create 3d printed adapters to run bigger cameras. This frame sports a massive 3mm thick main plate and 4mm thick arms (13.5mm wide). You have the option to use 20mm or 30.5mm stacks with a 25.5mm clearance between plates. Battery strap slots on the top plate are located near the rear, so that you’ve got plenty of room up front to mount your GoPro. Slots in the rear of the top plate are there for your VTx antenna to be directly strapped to the under side, with the SMA nicely protected inside the frame.

Included

Carbon fibre

4x arms

1x top plate

1x front top plate

1x rear top plate

1x bottom plate

Aluminimum

2x cam mounting alumi standoffs

6x M3 20mm standoff

Hardware Metal

8x M3 6mm iron bolts

8x M3 14mm iron bolts

2x M2 5mm cuphead iron bolts (cam mount)

Hardeware Nylon

4x M3 nylon nuts (FC stack)

4x M3 nylon 6mm standoffs (FC stack)

Other

1x lipo foam pad

4x dog bone foam landing pads

1x lipo strap

Frame weight 99.5g

Want some 3D Parts for your Dingo??? You can find them here at BMC3D

Racing Frames

SabotageRC Dingo 5

Product Description

See also