BetaFPV Beta85X 4K 4S BNF TBS Crossfire

Not only support 4S power, but also possesses high quality video and clear footage. What an awesome drone! Equipped with 1105 5000KV motors, new F4 V2 4S FC, BLHeli_32 and Caddx turtle V2 camera, using single N-channel MosFETs, soldering with 25V/220uf electrolytic capacitor, enable you to enjoy the powerful flight and beautiful scenery at the same time. Great choice for cruising, you can get tons of fun and speed in this cinewhoop.

Features

• Beta85X pushes the new era of brushless whoop drones to a higher level. With the new power system, you could fly real acro even with HD camera on 4S power.
• With the high performance STM32F051 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD) , faster input signals with lower latency and higher update rate are reachable, give you much more power. 
• Comes with upgraded F4 V2 4S FC, this FC is equipped with ports which support to plug the receiver, ESC, led board and VTX directly, no need to solder, convenient for installation.
• Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.
• Upgraded 1105 motor from 6000KV to 5000KV, with a light weight but definitely will give you extreme power and speed to support 4S. Motor comes with cable connectors. Just plug and play. EMAX Avan 2" prop is the best combo in this Beta85X drone.
• 450mAh 4S high rate battery is recommended by default. But pilot could also use their own batteries with battery strap. Optional and affordable.

General Spec

• Weight: 80g (without battery)
• Camera - Caddx Tarsier 
• F405 Flight Controller & 16A BLHeli_32 ESC V2.0
• Motors: 1105 5000KV with connector
• Props: EMAX Avan 2" 4-Blades Props
• FPV Camera: Customized EOS2 Camera
• FPV Canopy: Canopy for EOS2 Camera
• Receiver: TBS Crossfire Nano RX
• Battery: 4S 450mAh Battery (Not including)
• 5.8G FPV antenna
• 25-200mw VTX
• Battery strap fits for micro 2S-4S battery
• Flight time: 4min - 6min with 450mAh 4S battery (smooth flight in a windless environment)

FC SPECIFICATIONS

• CPU: STM32F405
• Six-Axis: MPU6000
• Size: 26mm x 26mm, whoop mounting pattern
• Firmware version: Betaflight OMNIBUSF4SD（OBSD）
• OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)

ESC SPECIFICATIONS

• Support BLHELI_32
• Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
• Input voltage: 3-4S lipo
• Cotinue current: 16A
• Peak current: 19A 
• Firmware target: BETAFPV-16A-32bit
• MCU: STM32F051K66

Includes

• 1 x Beta85X 4K Whoop Quadcopter(4S)
• 1 x ND8 Fliter for Tarsier 4K camera
• 1 x OSD Menu Board