iFlight Protek35 HD 3.5" 6S 2700KV DJI Air Unit PNP

FPV → HD Video Links → DJI FPV Digital HD → Drones with DJI Digital HD FPV System → 4" Drones with DJI Digital HD FPV System → iFlight Protek35 HD 3.5" 4S 3600KV DJI Air Unit PNP → iFlight Protek35 HD 3.5" 6S 2700KV DJI Air Unit PNP

Brand: iFlight

Model: Protek35 HD

Item Name: 3.5 Inch 151mm F4 6S Whoop FPV Racing Drone

Wheelbase: 151mm

Bottom Plate Thickness: 3.5mm

Upper Plate Thickness: 2mm

Size: 118*91mm

Weight: 348±10g

Beast AIO F7 45A FC ESC	Brand Name: iFlight Model: Beast F7 45A AIO (MPU6000) 25.5x25.5 FC: MCU: BGA-STM32F745 Gyro: MPU6000 Blackbox: 8Mb Onboard Flash BEC output: 5V 2.5A Barometer: BMP280 Connector: Micro-USB OSD: AT7456E FC Firmware：IFLIGHT_F745_AIO Mounting pattern: 25.525.5mm φ3mm Dimensions: 32.532.5mm Weight: 8.5g ESC: Uarts: 5 Current Sensor: Yes Input: 2-6S LIPO Current scale: 200 Constant: 45A / Burst: 50A BLHeli: BLHeli-S Telemetry: no ESC Firmware: BlheliS G-H-30 Mounting pattern: 25.525.5mm/Φ3mm Dimensions: 32.532.5mm
XING 2203.5 2700KV Brushless Motor	Brand Name: iFlight Model: XING 2203.5 KV: 2700KV Lipo: 6S
Nazgul 3535 Propeller	Brand Name: iFlight Model: Nazgul 3535 Item Name: 3535 3.5x3.5 3.5 Inch 3-Blade Propeller Quantity: 2 CW & 2 CCW
DJI FPV Air Unit	Operating Frequency: 5.725-5.850 GHz Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm Low Latency Mode (720p/120fps): <28 ms High-Quality Mode (720p/60fps): <40 ms Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km Video Format: MP4 (Video format: H.264; Audio format: ACC-LC) I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot Operating Temperature Range: 32° to 104°F (0° to 40°C) Input Power: 7.4-17.6 V, about 4-9 W Sensor: 1/3.2'' CMOS; Effective Pixels: 4 M Lens: 2.1 mm, f/2.1 Shutter: Rolling shutter ISO: 100-25600 FOV: 150°(D); 122°(H); 93°(V) Dimension: 22.1 x 21.1 x 20.1 mm Weight: 8.2 g
Optional Receiver	BNF-DJI Version: with Built-in DJI Receiver; Frsky XM+ RX Version: with Built-in DJI RX and with External Frsky XM+ RX Frsky R-XSR RX Version: with Built-in DJI RX and with External Frsky R-XSR RX TBS Crossfire Nano RX Version: Built-in DJI RX and w/ External TBS Crossfire Nano Receiver
Recommended Battery (No Included):	Recommend 6S 1300mAh Lipo Battery XT30 Plug Flight Time: 9-10mins Flight Time(with camera for Gopro): 6-7mins

Features:

1. The 3.5-inch propeller has higher efficiency and strength; this product is easy to disassemble and easy to carry; reasonable power configuration, longer battery life.

2. Plastic protection ring, new design concept, lighter weight.

3. Excellent structural design brings a more enjoyable control feel to flight.

4. The frame is designed with inlaid copper pillars for easy disassembly and maintenance. It only needs to disassemble the top and bottom plates with a total of 12 screws.

5. With LED on the Drone Tail, the LED Color is changable which can reminds you the Battery consumption condition.

6. It is more flexible than Green Hornet and Bumblebee for FPV Racing.

Package Included:

1 x iFlight Protek35 HD 3.5 Inch 151mm Whoop FPV Racing Drone 6S

4 x Propeller

1 x Battery Tie

1 x Screw Set

1 x EVA Cotton Strip

iFlight Protek35 HD 3.5 Inch 6S Cinewhoop FPV Racing Drone BNF DJI FPV Air Unit 2203.5 2700KV Motor Beast AIO F7 45A FC ESC